Optional relay or switch to share microscope input with another accessory, typically an EDX system.
DESIGNCAD EXPRESS V21.2 UPGRADE
When running under Windows XP or newer, it is recommended to upgrade to QCAD (see the last step above). Older versions of NPGS used DesignCAD LT 2000, DesignCAD Express v16.2, and/or DesignCAD v21.2. High speed (5 MHz), 16 Bit, high resolution (0.25%) PCIe516 lithography board. DesignCAD is a separately licensed program.
NPGS – Version 9.1 (See “”Upgrade History”” for a listing of the most advanced features.)ĭesignCAD Express v21.2 (five copies included).Ħ4 bit Windows 10 Pro (when PC is included).
DESIGNCAD EXPRESS V21.2 SERIAL
Any digital microscope can be supported, if the serial interface protocol is available.įaraday Cup & Picoammeter NPGS can optionally be connected to control a Faraday cup and/or read from a picoammeter, but most systems will have a manually controlled Faraday cup and picoammeter. Interface programs for several common digital microscopes are available at no charge. Any automated stage can be supported, if the serial interface protocol is available. Image Signal within +/-10v used for NPGS Alignment feature.īlanker within +/-5v, <200 mA fast blankers, slow shutters, and systems with no blankers are all supported.Īutomated Stage interface programs for several common automated stages are available at no charge. In either case, the picoammeter is usually not directly connect to NPGS, although it can be through a optional interface. Typically, an external picoammeter is connected to the specimen current output from the microscope stage, or less often, a picoammeter will be built into the microscope. Picoammeter A picoammeter that can read the beam current hitting the sample is required for lithography.
Analog XY Inputs +/-3v to +/-10v range typical, other ranges can be supported >5k ohms impedance typical, >2k ohm is supported.
0 kommentar(er)
